Instructions for connecting neons to cigar lighter plug.

1)

2)

3)

Strip the ends of the wires you wish to connect to the cigar lighter.

Pictured shows where you can unscrew the front of the plug. 

Once unscrewed remove the front and pull through the wires.

4)

5)

6)

Locate the nose to the plug. Compress pin at the front.

When this pin is compressed on the inside tightly rap the Red wire (live) around the metal, when the pin is released this will be held tightly in place

Locate earth strap, item above, tightly rap the black wire (negative) around this metal ensuring it is tight and will stay attached.

7)

Slot the earth strap back in to its grooves within the plug, then re screw the top of the plug on. The plug is now ready for use.